just not running rite

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jamo
    Retired OG Mod
    • Mar 2004
    • 21750
    • Country: United Kingdom

    #16
    It's the PCV ( positive crank ventilation ) valve nothing to do with boost pressure control

    Comment

    • S2central.net
      Retired OG Mod
      • Jul 2003
      • 16590
      • Country: Northern Ireland

      #17
      Yep - that PCV valve opens when crankcase pressure exceeds a certain (unknown) value so as to vent fumes back to intake system.
      Paul Nugent
      Webmaster http://S2central.net
      Administrator http://S2forum.com

      1994 S2 Coupe ABY - aka Project Lazarus
      2001 A6 allroad 2.5TDi - family tank
      2003 S4 Avant 4.2 V8 - daily burble

      Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)

      There are only 10 kinds of people that understand binary - those that do, and those that don't

      Comment

      • QuattroFever
        S2Forum Extremist
        • May 2006
        • 1360
        • Country: United Kingdom

        #18
        are u pressurizing from MAF hose? PCVvalve will leak air as it is eventually linked into that hose via a connection in the cam cover.
        Volcano ABY coupe

        Ant

        Comment

        • archiboy24
          S2Forum Addict
          • Sep 2003
          • 286
          • Country: Canada

          #19
          I'm going to watch this thread closely, as I seem to be having the same problems. runs very well if I'm not at WOT. Once I floor it though and boost starts to build, I get a jarring case of the hiccups from about 3000 to 4000 RPMs. Only happens when engine is close to or at 90C. Before that, smooth as silk.
          Ben
          Calgary, Alberta
          Canada
          1991 CQ e//S2 w/ RS2 spec 3B 20vt
          Panther Black Metallic
          www.moda-architecture.ca

          Comment

          Working...