Engine not starting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fat Audi 80
    Super Moderator
    • Jan 2004
    • 10547
    • Country: England

    #31
    Hi Andy,

    If it was me I would change the ignition switch just to rule that out. I don't think they are expensive and not hard to fit. Never done it myself mind!

    Cheers,

    Steve.
    The Perfectionist
    sigpic
    Audi Class Concours winner Stoner Park 2014, ADI Concours D'Elegance Class Winner 2008, Runner up 2014. Winner, S2Forum Show'n'Shine Billing 2006 & 2008.

    Comment

    • GT500
      S2Forum Fiend
      • Jun 2006
      • 2181
      • Country: United Kingdom

      #32
      try a starter relay, you should be able to swap one from say fog lights, i think they are the same.
      Rob..
      94 RS2 Noggy,LHD,MTM map,18"cup 1s,245/35/18,Bilsteins,RS2 H&Rs,Cup splitter.
      87 UR 20v ABY
      97 S6 Avant
      96 A6 C4 2.5 TDI quattro avant,Ming,Wietec/eibach,chipped
      1967 Ford Mustang,Eleanor,460ci v8

      Comment

      • Sonic
        Administrator
        • Jul 2006
        • 5514
        • Home: United Kingdom Current: England

        #33
        Cheers Steve and GT500

        Will get a new ignition switch and give it a go.

        Is the starter relay under the dash on the drivers side?

        Andy
        S2Forum.com Administrator

        Comment

        • GT500
          S2Forum Fiend
          • Jun 2006
          • 2181
          • Country: United Kingdom

          #34
          NO, under the bonnet with the fuses, I would tell you the position, only mines in french,,
          Rob..
          94 RS2 Noggy,LHD,MTM map,18"cup 1s,245/35/18,Bilsteins,RS2 H&Rs,Cup splitter.
          87 UR 20v ABY
          97 S6 Avant
          96 A6 C4 2.5 TDI quattro avant,Ming,Wietec/eibach,chipped
          1967 Ford Mustang,Eleanor,460ci v8

          Comment

          • Nuvo
            S2Forum Possessed
            • Nov 2003
            • 3825

            #35
            Just to be contraversial, I don't think there is a relay for this. To clarify, not in the main fues box anyway. Isn't it integral to the motor itself (solenoid)?

            Relay position #8 has pin 36 and 38 jumpered in this position, these go to the starter via the ign. switch.
            Last edited by Nuvo; 4 December 2007, 17:24.

            Comment

            • Sonic
              Administrator
              • Jul 2006
              • 5514
              • Home: United Kingdom Current: England

              #36
              If you put a wire between 2 of the immobiliser cables to cut out part of the cobra system it will turn over every time, but not start.

              Does this prove that the immobiliser is to blame?
              S2Forum.com Administrator

              Comment

              • GT500
                S2Forum Fiend
                • Jun 2006
                • 2181
                • Country: United Kingdom

                #37
                Originally posted by Sonic
                If you put a wire between 2 of the immobiliser cables to cut out part of the cobra system it will turn over every time, but not start.

                Does this prove that the immobiliser is to blame?
                Looking more like it!
                Rob..
                94 RS2 Noggy,LHD,MTM map,18"cup 1s,245/35/18,Bilsteins,RS2 H&Rs,Cup splitter.
                87 UR 20v ABY
                97 S6 Avant
                96 A6 C4 2.5 TDI quattro avant,Ming,Wietec/eibach,chipped
                1967 Ford Mustang,Eleanor,460ci v8

                Comment

                • s20ale
                  S2Forum Addict
                  • Aug 2004
                  • 476
                  • Country: England

                  #38
                  I would say it was the cobra immob that is cutting the ignition, as you now have the engine turning over.
                  sigpic

                  Comment

                  Working...