inlet manifold help

[gtimad73]

im after a inlet manifold for my 2.0 16v abf engine. ive been told thats the 20v urQ/s2 one fit if cut down. the reason for wanting one is that the abf inlet wont take bigger injectors. what sort of price would i be looking at for one of these. as you can see im new so sorry if ive posted in the wrong section. p.s there are some wicked cars on here.

EDIT ive just noticed ive post in the wrong section. i didnt see inlet/exhaust section sorry

[Flat on my back]

Like this...

You after something like a, 20v 7A inlet manifold?

I have a spare available.

[gtimad73]

sorry it has to be the turbo one. that type is the same almost as the one that on the car bar the extra pipe. i want to cut the last port of and plate up the end to take my TB.cheers

[gtimad73]

is that engine a 7a then, ive heard ppl taking about aby, 7a and so on

[terrybullwon]

I sold my exhaust manifold to a chap with a golf 16v, he cut and welded it. Your best bet is to post a wanted thread up. I sold a 3B engine coded one for about £30 iirc

Its a good time as lots of people are changing there intake directions

[quattrostyle]

@tbw he is looking for an IM not EM

[terrybullwon]

@tbw he is looking for an IM not EM

Opps my english was bad there.... i knew that as per the end of my post

Its a good time as lots of people are changing there intake directions

[gnutz2]

I have a aby inlet manifold, which i started to cut off number 1 runner with a hack saw then changed my mind.

You could have that for cheap

[Jas11n]

One currently on ebay germany, click the pic below,



Jas..

[gtimad73]

cheers everyone, but i was looking to get an idea or prices. so i can mke a wish list up. hope everyone has a good xmas. and santa brings you alll big turbos lol