3b -> Aan

[lynx]

Hi

Have anyone done 3B->AAN?
Let' s not talk about wiring, that I know, but physically? Engine mounts, etc?
Intake won' t fit, but does wagner intake fit with AAN steering pump? I mean, if I take AAN with all it' s goodies (alternator, steering pump, a/c) and fit it with wagner intake, how does it fit under bonnet?

thanks,
marek

[lynx]

Hi again

Now I have other problem, maybe now someone knows.

I want to remove my 3b and replace with AAN (I have my reasons), but I still I want to keep it 3b.

Does AAN block have all connections? Engine, steering pump, alternator, a/c mounts holes, etc?

So, can AAN converter to 3b? Mainly, does all 3b goodies fit to aan, and 3b engine mounts?

thanks,
marek

[kwlw]

So, can AAN converter to 3b? Mainly, does all 3b goodies fit to aan, and 3b engine mounts?

You will need ignition distributor for this. That means, you will need to install one from 7A or 3B. And that means - you will need (or will need other) gear on camshaft (hole for mounting it - is OK on AAN), or swap camshaft with AAN.

Sau

[lynx]

You will need ignition distributor for this. That means, you will need to install one from 7A or 3B. And that means - you will need (or will need other) gear on camshaft (hole for mounting it - is OK on AAN), or swap camshaft with AAN.

Sau

Yes, I know that I have AAN witch got camshaft sensor in the back, like 3B, so this isn' t the issue.

Main question, can I bolt steering pump, a/c, alternator, engine mounts? Is there places for them? Cam cover and bottom belt pulley, I know

thanks,
marek

[Firebird69]

Hi lynx,
how did that 3b-AAN conversion work for you? Iḿ just about to put a 3b block into my S4 AAN it everything beides the block needs to stay AAN.
I'm woundering if that will fit...
thanks
Micha