Need help with Mk2 Golf 16v S2 oil feed kit

[Oak16v]

Hi guys im after a oil feed and return kit for my Mk2 Golf 16v im using a Audi S2 kkk 24 7000 turbo, any of you kind ladies and gentlemen know of a kit i could use, as allways ur help in this matter would be much appreciated

Many thanks

Billy

[macspring]

I know it's an S2 Forum

But any more photos of your two cars on a separate thread?

Kind regards.

[hiltoa]

But any more photos of your two cars on a separate thread?

Kind regards.

Ditto!

[Rusty]

Ditto!

Me three... love mk.2s

Are you talking about the oil lines or the fixing to the sump?

[quattronutter]

a mk2 td sump may be useful as it has the return pipe,also the oil feed housing which is fitted above the oil filter housing,you would have to convert back to air cooled oil cooler which is better anyway

[Oak16v]

My mk2's

Hi guys

Thanks for the help, the car to the right isnt mine its a pal's of mine. She's a little gem in a rare gold-green colour. Think its the only LHD C reg 16v golf in UK ( See pic below for a example of the lush colour ) My car is in the garage in bits at the min, awaiting the 2.0 6A 16v turbo engine im building up, the Borbet A 9x16 hav now gone, sick of the rear tyre's rubbing, going for a set of G60steelies, and possibly get them banded to 8x15.







Cheers Billy

[Rusty]

Sweet, always preferred the small bumper look for some reason. A3 rims look pretty decent on there too

[GazzaG60]

i got a 16v oil kit somewhere. from the 16vt.

i got a baffled sump with a windage tray and the fitting for return also if needed.

i got 2 6 speed 02m boxes with shafts, linkage and all

i got a 9a block with wiseco pistons and scat rods and new pumps.

i got the beetle rocker cover breather to stop you filling a catch can every 1/4 mile.

i got a spare 6a block

i got 2 heads

i got a twin exhaust cam setup with the original stealth pulley to make it work.

i got a 02a passat 16v box.

i got the factory s2 turbo and lines on a manifold. 0personally i wouldn't bother as its too small a turbo

got the boost factory snake manifold i planned to use, tial wastegate etc
plus other bits.

let me know if i can help