RS2 bearings

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pirvu Eugen
    S2Forum Extremist
    • Apr 2007
    • 1978
    • Country: Romania

    #1

    RS2 bearings

    Hello!
    1 question...
    I have ordered 6 sets off 034 198 491C main bearings for RS2 and i have received only 4 sets...
    After complaining they send the other 2 sets...but...inside the box i found diferent bearings noted as 034 591B... can you tell me from wich engine these are??
    these were inside a box noted with corect nr. 034 198 491C...
    please help!
    All the best!
    Eugen
  • Audi Parts Guru
    S2Forum Extremist
    • Jul 2003
    • 1317
    • Home: England Current: United Kingdom

    #2
    Originally posted by Pirvu Eugen
    After complaining they send the other 2 sets...but...inside the box i found diferent bearings noted as 034 591B... can you tell me from wich engine these are??
    these were inside a box noted with corect nr. 034 198 491C...
    You can't tell from that number as it is not a proper part number.

    Having said that, do they look the same as the other bearings?
    S2 Avant......fully loaded :rock: :bow: Slipper Wagons Rule !!!!!

    Comment

    • s2_bo
      S2Forum Zealot
      • Oct 2005
      • 6067
      • Home: United Kingdom Current: France

      #3
      Was there no part number on the case they came in??
      91 S2 coupé - RIP
      98 S8 - Luxury barge

      Comment

      • Pirvu Eugen
        S2Forum Extremist
        • Apr 2007
        • 1978
        • Country: Romania

        #4
        noo..
        they came in same boxes as the first ones..with the right part number on...
        So on the box was 034 198 491C....but the bearing inside were noted as 034 591 B...and they are different then the first ones i received wich are noted as 034 591 C..
        the oiling chanal is smaller also at B ones...they are not for Rs2 for sure..
        I hope they didint change the parts now...

        Comment

        • Pirvu Eugen
          S2Forum Extremist
          • Apr 2007
          • 1978
          • Country: Romania

          #5
          from the left to right...the RS2 ones noted as 034 591C and the others received now noted as 034 591B..the diference is big..
          Attached Files

          Comment

          • Pirvu Eugen
            S2Forum Extremist
            • Apr 2007
            • 1978
            • Country: Romania

            #6
            the part number from the wrong ones...
            Attached Files

            Comment

            • Audi Parts Guru
              S2Forum Extremist
              • Jul 2003
              • 1317
              • Home: England Current: United Kingdom

              #7
              Who supplied the bearings?
              S2 Avant......fully loaded :rock: :bow: Slipper Wagons Rule !!!!!

              Comment

              • LHD_Kid
                S2Forum Possessed
                • May 2006
                • 3695
                • Home: England Current: Belgium

                #8
                Hi Eugen,
                I'm getting a little confused with the numbers here, as you seem to keep changing, in this thread there are now 4 different part numbers...
                You ordered 6 sets of bearings from Audi, part number 034 198 491C (ending 491C)
                Audi supplied 4 sets of the correct part, and you had to wait for the least 2 sets
                They then supplied these bearings, printed on the box was the same (correct) part number as above, but inside the bearings had number 034 198 591B (ending 591B), is this correct?
                From the picture, it does look very different and I would think you really need to get the exact same model of bearing.
                If somebody in the know could confirm this iit would be good...
                I assume Audi Romania are covering their incompetence by telling you the part number and design of the part has changed.....
                Good luck....
                Chris
                Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
                S2 Coupe... bit easier off the line...
                '03 ZX12-R daily hack.... lots of nice bolt ons...

                Comment

                • Pirvu Eugen
                  S2Forum Extremist
                  • Apr 2007
                  • 1978
                  • Country: Romania

                  #9
                  Porsche Romania...the main Audi dealer here....Stealers..

                  Comment

                  • LHD_Kid
                    S2Forum Possessed
                    • May 2006
                    • 3695
                    • Home: England Current: Belgium

                    #10
                    Originally posted by Audi Parts Guru
                    Who supplied the bearings?
                    Main Audi main dealer in Romania - "Porsche Romania"
                    Good eh?
                    Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
                    S2 Coupe... bit easier off the line...
                    '03 ZX12-R daily hack.... lots of nice bolt ons...

                    Comment

                    • Pirvu Eugen
                      S2Forum Extremist
                      • Apr 2007
                      • 1978
                      • Country: Romania

                      #11
                      Yes Chris...is corect..the bearing sent by them now is ending in B...the first ones were with C...I cant find this bearing in my Etos..

                      Comment

                      • Pirvu Eugen
                        S2Forum Extremist
                        • Apr 2007
                        • 1978
                        • Country: Romania

                        #12
                        I hope they will not try to bul...t me with changing the design....is obvious that the bearings are diferent. or they dont know how to sell some **** stuff???

                        Comment

                        • Pirvu Eugen
                          S2Forum Extremist
                          • Apr 2007
                          • 1978
                          • Country: Romania

                          #13
                          sorry about that word!!! i am angry..

                          Comment

                          • Pirvu Eugen
                            S2Forum Extremist
                            • Apr 2007
                            • 1978
                            • Country: Romania

                            #14
                            Originally posted by LHD_Kid
                            Hi Eugen,
                            I'm getting a little confused with the numbers here, as you seem to keep changing, in this thread there are now 4 different part numbers...
                            You ordered 6 sets of bearings from Audi, part number 034 198 491C (ending 491C)
                            Audi supplied 4 sets of the correct part, and you had to wait for the least 2 sets
                            They then supplied these bearings, printed on the box was the same (correct) part number as above, but inside the bearings had number 034 198 591B (ending 591B), is this correct?
                            From the picture, it does look very different and I would think you really need to get the exact same model of bearing.
                            If somebody in the know could confirm this iit would be good...
                            I assume Audi Romania are covering their incompetence by telling you the part number and design of the part has changed.....
                            Good luck....
                            Chris
                            you are right!
                            first order was 6 sets 034 198 491C....i received 4 boxes with 034 198 491C on them..
                            inside the bearings are noted with 034 561 for the block one and 034 591C for the cap...these are ok..big oil canal so on..RS2 ones..
                            Now i ordered the rest off 2 sets and i received 2 boxes with 034 198 491C on them...but inside the boxes i found 034 561B for the block one and 034 591B for the cap...
                            the last ones i received are made by KS and the first ones are made by diferent company...dont know what to say...the KS ones are not the good ones...
                            they change supliers like this?

                            Comment

                            • pfi
                              S2Forum Addict
                              • Jun 2016
                              • 274
                              • Country: Norway

                              #15
                              In process of rebuilding but 034198491C is "Dropped on 01/04/2015 without replacement"
                              Contacted my local VAG dealer and they confirmed the "dropout".
                              Found :
                              - Glyco : H981/6 STD
                              - KS (KolbenSchmidt) : 77209602
                              The block side is probably ok,
                              but,
                              the cap side on both looks as the 034 591B in the picture in post #5 above

                              Also chk'd Audi Tradition for 034198491C with no luck ...

                              Suggestions ?

                              Comment

                              Working...