Inlet manifolds flow test

[Acidburn]

I'd be interested to know this as like I said above i'm trying to decide what to fit to mine as the rs2 has to be modded to fit the 3b as newsh found out.

[HPmuirt]

The RS2 IM is different from the ABY and 3B as it has more capacity.

Really? Has anyone ever proven that?

If not, does anyone have an RS2 and S2 IM kicking around that they could fill with water to check the capacity?

If there IS a difference, does anyone have an RS2 IM for sale?

Cheers n

Si

[Bram]

That is correct. Javad did al the flow tests. The 034 IM is from Wagner AFAIK.

The RS2 IM is different from the ABY and 3B as it has more capacity.

[Billman]

I think this test was performed by 034 Team and posted over a year ago in Motorgeek.

[BRY]

Grant has an AAN inlet which has been port matched.
His power levels are good enough for me.

[HPmuirt]

I always assumed that the RS2 and ABY are identical internally (just badge differences on the outside) but has anyone ever demonstrated this?

Cheers n

S

[Acidburn]

So 3b does flow more then RS2, there was some debate about this a while ago.

Peter, the 034 one is reversed as the injector mounts are on the other side. Wonder how the manufacture is though? It doesn't look like a Wagner one unless its reversed.

cheers for that, I was not sure.

I'm trying to decide what to put on mine either the 3b or the porsche or even a reverse one?

[s2_bo]

So 3b does flow more then RS2, there was some debate about this a while ago.

Peter, the 034 one is reversed as the injector mounts are on the other side. Wonder how the manufacture is though? It doesn't look like a Wagner one unless its reversed.

[Acidburn]

Some interesting information there as I remember seeing this before.

3b's good for something else again

034 one I take it is a chopped or reverse one?

[terrybullwon]

I saw this on Zatzy, I hope Martinssons does not mind them posted here to...

RS2


AAN


034


3B