Add your piston specs here...with maybe a picture...mass, bore, wrist pin size, custom features etc
Standard and aftermarket all welcome.
Worth doing as a 'sticky'?
Standard and aftermarket all welcome.
Worth doing as a 'sticky'?
-
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.uk -
i need the specs of stroker for stock 20vt block, 144mm rods.--------------------------------------------------------
Real carbon parts for S2 and RS2. Check Carbondesign on facebook -
Hi aron,
do u want an 2,5l stroker?
u need it for 92.8 or 95.5mm stroke?
We have custom made JE Pistons for Stroker with using 144mm Rods!kind regardsComment
-
I know its not turbocharged but just done measurements on stock 7a pistons as an extra example if its any use to anyone...
Size = 82.5mm bore. (82mm diameter at lower skirt / 81.75 crown diameter <cold>)
Gudgeon pin = 20mm x 57mm x 4.5mm
CR = 10.3:1
Weight = 349gm (piston) 90gm (gudgeon pin)
Ring grooves = 1.2mm - 1.7mm - 3mm
Valve pockets = 28mm x 9.6mm x 3mmJay - pug_life85@hotmail.com
1986 Audi UR quattro - WORK IN PROGRESS
1981 VW Mk1 Golf - "20v Jim, but not as we know it!"Comment
-
--------------------------------------------------------
Real carbon parts for S2 and RS2. Check Carbondesign on facebookComment
Comment