What is this???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bcdesigns
    S2Forum Enthusiast
    • Apr 2004
    • 193
    • Country: Portugal

    #1

    What is this???

    Help me!
    This is normal? I had seen engine's photos that have there a tube conected... What this do???




    Weird
    Audi 100 TDI :mischeif:

    MRC remap; Green Injectors; Champion Sparks; Forge DV 006; Samco Intake pipes; K&N filter
    Xenon 6500k; Pillar Boost gauge; Alpine CDA 9835R on Bose with Infinity Sub
    Oettinger 8x18" with GS-D3 225/40ZR18; Bilstein with H&R Springs (-40mm)

    www.autopamplona.com
    www.mrctuning.com
  • auditude
    S2Forum Addict
    • Aug 2003
    • 407
    • Country: United States

    #2
    Re: What is this???

    That is normal on a 20vt car. On the earlier 10vt, the wastegate frequency valve is connected to that. On 10vt's, the boost control applies modulated boost pressure to the upper chamber to counteract unregulated boost pressure on the lower chamber. On the 20vt's, the boost control limits pressure to the bottom chamber with the wastegate frequency valve (WGFV).
    Kenneth
    1990 Coupe quattro
    1991 200q20v x 2
    1985 4ksq 20vt project
    1986 Coupe GT 10vt project
    2006 Honda Ridgeline
    1998 Honda VFR800FI

    Comment

    • Ski
      S2Forum Fiend
      • Jan 2004
      • 2591
      • Home: Poland Current: United Kingdom

      #3
      my m8 have a 10 valve turbo audi and his dotn go no where either..

      the dumpvalve has no where for this non existant pipe to attach too either... weired.. (im presuming the above says that this mysterious valve should go into the dumpvalve?)
      ABY Coupe
      sigpic

      Comment

      • Beetie
        S2Forum Extremist
        • Oct 2003
        • 1517
        • Country: England

        #4
        This is normal, S2's turbos recirculate, rather than dump to atmosphere
        Was a '93 3B, Dont ask now tho......

        Comment

        • Ski
          S2Forum Fiend
          • Jan 2004
          • 2591
          • Home: Poland Current: United Kingdom

          #5
          pure efficiency
          ABY Coupe
          sigpic

          Comment

          • 91_S2
            S2Forum Maniac
            • Jul 2003
            • 612

            #6
            Originally posted by bcdesigns
            Help me!
            This is normal? I had seen engine's photos that have there a tube conected... What this do???




            Weird
            Dude,

            That is normal. It simply leaves the upper chamber of the waste gate open to atmospheric pressure. I think some boost regulators like Apexi and HKS use that to put pressure into the upper chamber to prevent waste gate creep.

            Comment

            Working...