Chips ABY

[wastegates]

They say to me to companions whom is Chips ABY racing , that typical they have? Pressures of I disturb and rpm? CVs and NM?

[urquattro-island]

hmm

what?? didnt understand that quite right

[Rusty]

Assuming you are on standard turbo (k24).

Homefries form S2Central.net on here (Paul) are 1.5bar peak, 0.8bar @ redline. Expect 280+bhp and 300+ftlbs (400+Nm).

Another option are MRC chips, low boost version is 1.2 max, 0.8 redline and high boost is 1.6+max and 0.8 redline but only suitable for a good free-flowing 2.75"+ exhaust and good intercooler. 280bhp 290ftlbs/320+fltbs.

All figures depend on you setup.

Both Homefries and MRC are about £250 + postage.

Hope this is something like what you wanted.

[S2central.net]

Subtle difference - that price from MRC is chips only - fit them yourself (or pay someone else that can).

Mine is hands-on ECU upgrade with sockets and testing before return to owner.

Paul

[Rusty]

A thousand appologies Mr Paul

[wastegates]

It does mas of 1 year that Paul did the rescheduling of the ABY to me.
I happen for DinoRace and the result was of: 284 cv and 410 Nm.
Sending PM several times but it does not answer to Paul and because of it I ask here.

Thanks to all.

[Rusty]

He's a busy man . 284bhp and 410Nm is a good result

[wastegates]

He's a busy man . 284bhp and 410Nm is a good result

It is that already I am accustomed and it seems that does not run jajjajajja

Thanks Andy

[Rusty]

Best go for an RS2 turbo or 2871 / 3071 then, there's nothing left out of the K24

[wastegates]

Best go for an RS2 turbo or 2871 / 3071 then, there's nothing left out of the K24

Andy..... KKK 7200 ??? + 5 - 1 = CV ? Nm ?

With the current reprograming that made me Mr. Paul for the ABY.