You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
At long last I have managed to put together a dry sump kit with Pace, this has been going on for the last 18 months, many visits to them (200 miles each way), project manager leaving and some else taking over. Etc etc. People sick or on holiday, usual staff.
Anyhow here is some pictures as assembled on the engine.
Sorry but i cannot get to load the pic of the other side of the sump, here is one with the pump in situ, aslo the new wide pulleys to carry the 25mm belts
i thought the whole point of running a dry sump was to be able to get more clearance to drop the engine and lower the centre of gravity?
am i being really dumb?
i thought the whole point of running a dry sump was to be able to get more clearance to drop the engine and lower the centre of gravity?
am i being really dumb?
Yes I agree with your comments and if I could have have enough interest sumps could have been casted for this purpose, or even CNCed, but dont forget I had an order for one right kit as per the pictures (customer wants to retain AC) and two left hand, and one of them drop out half way through.
So do you think the cost for casting just 3 (in the end 2) sumps? So I had to go with the modified existing one. No choice unless you want to pay huge sums and economic situation doesnt help either.
BTW dry sumping is not only for lowering the centre of gravity, old Grp B car run dry sumps and probably in the forest were a lot higher on suspension set ups then standard
Not to rain on your parade after 18 months of torture but,
Agree with Error404's comment, but also fully understand/appreciate your reply and now for the big but, is it not a lot of trouble, nay expense for not too much gain compared to other mods? Or is it the last mod for someone who wants to go a step further than most?
You might not be able to lower the engine but you can move some of the weight to the rear which i think is more important in our cars. Notwithstanding the main benefits of a dry sump system of course.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment