bottom pulley wanted

[andyg plym]

after reading lots of threads its clear to me that the bottom pulley is a common problem on the S2's.
Mine doesn't run true on idle but when the revvs increase it runs perfect.
Some people say on here they are approx £300 from the stealers and others say they can be had at under £20.
My engine is an ABY which is different to the 3B.Has anybody got a decent spare or knows of a good source for them?

cheers

[aelred]

Andy, Is it just with the multi V type belt as I have a good one or is this one that I have for a AAN engine?

[andyg plym]

aelred,
its just a standard aby pulley with aircon and obviously power steering

[aelred]

so it has multi V belt plus 2 V grooves for conventional V belts. In that case the one I have is for the AAn, sorry

[andyg plym]

doh!

[aelred]

have a look at the photo album as I think the rear part is a pressed steel section that can be removed where the two conventional V belts go. The ANN has a similar set up and you could put your section on to the back of this one as it has a detachable rear part in pressed steel. I am not a 100% sure tho.

[s2_southwest]

no i didnt andy

[andyg plym]

ok mate pm me a price just in case cheers