Vmap

[twoqu]

Hello!

Anybody have experience of fitting a Vmap? Wheres the best place to source one?
Cheers!

[90quattrocoupe]

Vmap from the inventor.


Greg W.

http://www.laantech.com/

[Jamo]

MRC are official stockist so are 034 AFAIK

[S2central.net]

I've only ever sourced them from manufacturer... Never been lucky enough to have UK distributor with stock. VERY easy to fit. I have the guide if its needed.

[Doug_RS2]

we have some in stock

[S2central.net]

D'oh

[A80Avant]

these are to replace the obsolete bosch ones? do they come in 400pKa as well?

[twoqu]

Hmm..
I am a bit confused over the varients. I would think the 2.5/3.0bar version would be ok for most peoples needs. Is that obsolete now? Keep seing version D mentioned and thats the one with lots of adjustments.

[S2central.net]

VMAP-D is the right one - it has jumpers on the board to make it run as per Bosch 3bar MAP. The other jumper options open up different dynamic range possibilities.

Paul

[S2central.net]

Sorry - correction - the 3bar VMAP-D has jumpers for 2.5 and 3.0 bar applications. The 4bar VMAPs have jumpers for more exotic options.

http://members.cox.net/urs6/

[Bram]

I have the VMAP 40421/0 in my Motronic ECU and it works as a direct replacement for the Bosch unit. I bought mine from RPM in Sweden at that time.

You find a complete list of resellers at:

http://members.cox.net/urs6/distributors.eu.htm

[Jamo]

we have some in stock

[sjw185]

Sorry - correction - the 3bar VMAP-D has jumpers for 2.5 and 3.0 bar applications. The 4bar VMAPs have jumpers for more exotic options.

http://members.cox.net/urs6/

Which one is best for rs2 spec 3bar or the 4bar ?

cheers

[S2central.net]

3bar VMAP is plenty enough for RS2 turbo.

[Smith_S2]

Is the Vmap a generic map?