Announcement

Collapse
No announcement yet.

Fuel Pressure Guage

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuel Pressure Guage

    Anybody fitted one recently that they would recommend or not ?

    I'm looking for something in the 52mm style, that might wind up in an auxiliary pod of some sort, with boost, EGT and maybe AFR.

    Do these generally have an electrical pressure sensor that can be T'd into the fuel line or need I specifically go looking for one with that configuration? I'm sure not gonna T the fuel line into the cabin for a fuel pressure guage !

    Ta,

    Paul
    Paul Nugent
    Webmaster http://S2central.net
    Administrator http://S2forum.com

    1994 S2 Coupe ABY - aka Project Lazarus
    2001 A6 allroad 2.5TDi - family tank
    2003 S4 Avant 4.2 V8 - daily burble

    Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)

    There are only 10 kinds of people that understand binary - those that do, and those that don't

  • #2
    look at this http://www.defi-shop.com/
    RS2 chip by mihnea,PKM short IM, forge dump valve, 3" custom stainless exhaust, 18"X8" Porsche 996 rims, conti contact 245/35 Front 225/40 Rear, QR sport top mount, Powerflex bushes, aloy sub frame bushes, neuspeed 19mm RARB,Hard tranny mount, V8 torsen on RS2

    Comment


    • #3
      mmmmmm - so much trinketry would be more at home in a Nissan Sunny methinks. Maybe more time is needed to see whats on offer, but it looks like rather a lot of confusing info scattered across the place. Not actually condusive to selling anything...


      Paul
      Paul Nugent
      Webmaster http://S2central.net
      Administrator http://S2forum.com

      1994 S2 Coupe ABY - aka Project Lazarus
      2001 A6 allroad 2.5TDi - family tank
      2003 S4 Avant 4.2 V8 - daily burble

      Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)

      There are only 10 kinds of people that understand binary - those that do, and those that don't

      Comment


      • #4
        FUEL PRESS. GAUGE
        http://www.greddy.com/products/produ...roductidx=1635

        BOOST GAUGE
        http://www.greddy.com/products/produ...roductidx=1626


        E.G.T. GAUGE
        http://www.greddy.com/products/produ...roductidx=1627

        AFR would be just a toy. To have a proper AFR You would have to use something more pro ... what at least AEM Gauge-Type Wideband UEGO Controller
        http://www.aempower.com/product_ems.asp
        AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net

        Comment


        • #5
          Paul, dare i ask why you are wanting this? Do you have a problem with your fuel pressure?
          sigpic
          Tom C - www.rcmr.co.uk
          Audi UR Quattro
          Audi 100 C3 2.0 5 cyl 115ps
          Audi S2 - 07k engine project aiming for 800ps
          Audi B5 RS4 645ps 911nm

          Comment


          • #6
            Originally posted by audiman
            Paul, dare i ask why you are wanting this? Do you have a problem with your fuel pressure?
            Paul,

            anything makes you think you have a problem with your fuel pressure? Last time we've connected the VAG message computer to my car it printed out a single message: iddle mixture production proble....Possible causes are: too low fuel pressure, too high fuel pressure, lambda probe failure, MAF failure. The MAF I've cleaned, the message remains there. Now comes the lambda. The fuel pressure measuring seems to me an unpleasant task, so many lines at so hidden away places.....
            Gabor

            96 ABY coupe full except sunroof. With Porsche big red brakes, remapped ECU, xenon lights, RS2 MAF

            Comment

            Working...
            X