How to test fuel pressure

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • max_s2
    S2Forum Addict
    • Mar 2006
    • 498
    • Country: Latvia

    #1

    How to test fuel pressure

    Hi.
    As the title says, I want to know how to test fuel pressure.

    1) I've a gauge and I can connect it between fuel lines. But where exactly?
    2) What BAR's I should see in idle?
    3) Should I take the car for drive and make WOT to see whats happens on the gauge?
  • max_s2
    S2Forum Addict
    • Mar 2006
    • 498
    • Country: Latvia

    #2
    And maybe someone can tell me from which coolant temp sensor ECU takes information for fuel richment - from the one that comes in cylinder head or from MFTS that comes below coolant mainfold?
    In VAG-COM it shows me 95c, but on spido coolant gauge I see stable 90c.. should it be so?

    Comment

    • Jamo
      Retired OG Mod
      • Mar 2004
      • 21750
      • Country: United Kingdom

      #3
      Originally posted by lv_max
      And maybe someone can tell me from which coolant temp sensor ECU takes information for fuel richment - from the one that comes in cylinder head or from MFTS that comes below coolant mainfold?
      In VAG-COM it shows me 95c, but on spido coolant gauge I see stable 90c.. should it be so?
      ECU use G62 the one in the cylinder head.

      Nice link below


      http://forums.audiworld.com/s4s6/msgs/148742.phtml

      MFTS is for the gauge

      Comment

      • Pirvu Eugen
        S2Forum Extremist
        • Apr 2007
        • 1978
        • Country: Romania

        #4
        Originally posted by lv_max
        Hi.
        As the title says, I want to know how to test fuel pressure.

        1) I've a gauge and I can connect it between fuel lines. But where exactly?
        2) What BAR's I should see in idle?
        3) Should I take the car for drive and make WOT to see whats happens on the gauge?
        I have instaled an oil pressure sender on to the fuel feed line. I grounded the adapter and i use an oil pressure gauge insight the car to monitor the pressure. At 3B at idle you should see ~2.5; 2.6 bar... depending on the vacuum from the intake.
        Hope this helps!

        Comment

        Working...