3B head resurfacing

[yodasfro]

Anybody know the specs for resurfacing a 3B head? IE minimal thickness the head can be cut and how much should be taking off? TIA

[Knight Rider S4]

For info i have taken 12 thou off my ABY head and running well

[Nuvo]

The minimum head height is 118.1mm (measured through the bolt hole).

[yodasfro]

Thanks guys!! Anybody else recall how much they had taking off their cylinder head?
I did find that 118.1 spec in the AAN pdf.

[yodasfro]

Talked to the machinist today said he had to take 12 thousandths off it.