Any interest in switchable chipsets ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mouse
    S2Forum Addict
    • Apr 2008
    • 374
    • Country: Australia

    #106
    After reading the chalenges others have had with ecu removal mine came out and went back in so easy.... too easy as it turns out as I now have no AC must have dislodged some cables and/or vacuum hoses when pushing the ecu back into place....

    Comment

    • mouse
      S2Forum Addict
      • Apr 2008
      • 374
      • Country: Australia

      #107
      FYI, the valet mode disables the AC. Which makes sense if it's done through an overheat signal.
      Last edited by mouse; 13 February 2010, 07:58.

      Comment

      • gmac78
        S2Forum Maniac
        • Oct 2009
        • 928
        • Home: Scotland

        #108
        I bought the 3b switchable map years ago "homefry/economy" but have never actually used the switchable function. I thought it was just a case of connecting the two wires that come out of the ecu to a simple on/off switch but when i tried this it did not limit boost. Well i actually never got round to fitting a switch as I simply connected the two wires together first to test the switchable function but it made no difference to boost level.

        What is the correct way to wire this up?

        Cheers

        Comment

        Working...