problem!

[timucin]

Maybachstraße 3
Phone: +49 60 74 / 9 33 28 and 9 33 78
D-63322 Rödermark / Ober-Roden
Fax: +49 60 74 / 9 33 16

[Audi_CQ]

this cam is 280 degree, mechanical

Watch out for too much overlap! Not a good thing in a turbo engine. A friend tried 284 degree cams, but had to use 7A inlet cam to make it work at lower revs.

Cheers
Roger

[Flexx]

heads were using hydarulic before ;
my plan was to replace cam and follwer to mechanical
i got all the parts except gears
do you have their phone number?

Do not have - but u will give me, I guess...

But normally dbilas have to send u the gears for free...they have to be included...whatever...when they don't know if a RS2 is a turbo or not...well - u think they're compotent enough for that big project ?? I would not trust them, because they r not specified on Audi 20v turbo engines !!!

[Flexx]

Watch out for too much overlap! Not a good thing in a turbo engine. A friend tried 284 degree cams, but had to use 7A inlet cam to make it work at lower revs.

Cheers
Roger

U damn right

Same problems had a friend of mine too

[timucin]

dbilas:
Maybachstraße 3
Phone: +49 60 74 / 9 33 28 and 9 33 78
D-63322 Rödermark / Ober-Roden
Fax: +49 60 74 / 9 33 16

[timucin]

**** me!
**** my head
i wont be able to finish this car...

[martinjs]

is the rest of your engine together yet timucin?
is it in the car yet?

[Flexx]

**** me!
**** my head
i wont be able to finish this car...

Cool down man....it's not easy to make a S2 goin 500+ hp....I know how it is

[timucin]

no parts no experts here, how can i cool down....
i want to cry man....

[timucin]

to receive this part from dbilas, i sent lots of mails, lots of faxes,lots of money, Mihnea spent lots of time to ship them,they even asked my first girlfirend name on customs to deliver it to me, i spent too much tips to take them and finally they do not fit

how would you behave?

[timucin]

now i am going to my office i will bring the paper , conversations between me and dbilas and you will understand what i mean

[Flexx]

now i am going to my office i will bring the paper , conversations between me and dbilas and you will understand what i mean

Timucin...

I understand...I will call them on Monday !!

The problem is & would be, that ONLY dbilas' gears can fit on the camshafts, because of the steeringtimes (I hope it called like this)...the other problems would be...that when u have the gears, u have to find the EXACT position on the camshafts !!!

Can I ask u how much u pay for the camshafts ? Both !

[Josh-stateside]

"Hi

kent cam gears make internal adjustable cam gears for the 16v 4 cylinder motor. They should work with those cam shafts.

Figured I let you know.

If there was a problem, Yo, I'll solve it
Check out the hook while my DJ revolves it



Cheers
Josh"

Forget that... I just read the last post.
I tried.

[spink]

quote 'If there was a problem, Yo, I'll solve it
Check out the hook while my DJ revolves it'

nearly choked on my beer reading that

[timucin]