Stroker AEL, AAT, AXE, AXD ??

[vcosmin]

In the next days , i have to buy a bootm end, for my tall block stroker engine, so searching, ETKA i found lots of codes, for 2.5 TDI engine, used, in 100 C4, Transporter T4 / T5, even in 2005 . So the question is, which one, is better ? and beside cracnshaft, and block, what other components from origina TDI engine should i buy ? or better, complete engine, without injector, injection pump, and cylinder head ? Thanks.

[Jamo]

AAT or AEL. AAT is better less hassle with the crank position sensor.

[goodall]

i was thinking today about the engine from a transporter, as im currently thinking of a 20vt build

are the rods any good from the stock diesel 2.5 or are they wrong length or weak?

[Rocco]

may the rods will are sotronger than our 3b/aby/aan/adu cars...???

[Jamo]

Rods are the wrong length and have a 24 or 25 mm wrist pin, totally unusable in a 20v petrol stroker.