As title looking to cope with 500bhp at lease
Craig
Craig
-
Audi A6 AEL 5cyl Quattro breaking.
Audi A5 3.0tdi Quattro Stage 2
07947385043 -
Careful that clutch might hold the power but will the dual massComment
-
I have clutch + flywheel combo for You.Everything less than 2 bar is considered to be naturally aspiratedComment
-
why isnt a dual mass flywheel up to the job on higher torgue?Comment
-
Why are you asking the same question that I've answered for you before?
Comment
-
i tend to forget! sorry!
it is most interesting though as i have seen many I5 engines with that setup and high torgues which didnt have any problems.
actually a friend recently had a custom made dual friction plate disc and still using the dual mass flywheel without any problems.
but anyway,its a different thread so.. sorry for the question...Comment
-
Vasillis, you're not having a great day on here
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
it seems so!
i should have posted after the headache! hehe
anyway,mainly reason for this was that i had more input from various sources that dualmass flywheels are quite robust,and 500hp would really make all that much of a problem with the use of a DM.
on the other hand,i cannot remember everything i have posted/talked about or asked months ago,especially when i have reached +6000posts and the work i do for a living does not involve being online most of the timeComment
-
So do i have to get the DM out of there then. Is it east to convert to SM?
Repo PM me what you have please.
Also looking at keeping the standard feel not paddle like.
CraigLast edited by K7ERG; 7 March 2009, 16:46.Audi A6 AEL 5cyl Quattro breaking.
Audi A5 3.0tdi Quattro Stage 2
07947385043Comment
-
Long term Dual Mass flywheels do not like torque, ask an S3 owner.
Granted the RS2 / ABY DM is a lot more robust than the average dual mass but I wouldn't use one on a turbo bigger than RS2 / 3071rComment
-
can i ask,
are these Steel single mass flywheels that 034 motorsport have for the 01E transmittion an option for the 6speed CRB/CGR gearbox? If so,what type of clutch kit should they go with?Comment
-
A80, get a 3B or 7A one, I seen to remember that older ones require some modification to fit.Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
oh if and when i will have to replace it i want to go with a new unit so that is why i was asking for the steel one.
I will email javad see what i can find out.Comment
-
Sounds like this one from Volcano is spot on for you then.Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
Comment