As stated - I'd like to finish off a high boost chipset for the RS2 setup. Looking at 1.8-2.0bar max in the mid range for 500-550Nm torque levels. Max power will be in 360-380bhp territory.
Needs to be a proper RS2 or fully converted ABY or AAN for now... A 3B based RS2 setup will follow later.
Ideal candidate is someone in British Isles with gizmo like a GTech (or similar) and an AFR gauge. Someone with access to good fuel as well of course.
A healthy discount will be available on this to assist in some data gathering - and the possibility of a few iterations to get it all sweet.
Cheers,
Paul
Needs to be a proper RS2 or fully converted ABY or AAN for now... A 3B based RS2 setup will follow later.
Ideal candidate is someone in British Isles with gizmo like a GTech (or similar) and an AFR gauge. Someone with access to good fuel as well of course.
A healthy discount will be available on this to assist in some data gathering - and the possibility of a few iterations to get it all sweet.
Cheers,
Paul




The only problem is that I'm from Spain!
Comment