Got 608HP and 660NM

[Sweeper]

On GT30R and my PK Engine yesterday.

The tuner is saying the car would be able to put around 760Nm but the clutch doesn't cope with it.

The clutch is Spec clutch 3+. Does anyone know are they capable of 650Nm+ values ?

Btw , Hi everyone , was away for a loong time , didn't have time to be here as the car was in the garage for about 2 yers

[lind4hl]

600bhp on gt30?

can you tell me everythingabout your spec on the car, since im building an 600bhp car.

repo on here has an ap racing 2disk sinter clutch with flywheel and everything.

[macspring]

With 608 bhp

you'll do plenty of sweeping with that spec.

Nice one.

BTW, when does it start to boost and what bar?

Kind regards.

[Rusty]

Awesome. Sounds like you need a better clutch, 3+ has been known to slip with 450bhp!

[Sweeper]

Thanks , still interesting how much does Spec 3+ can handle.

I will have a dynochart and boost figures in a week. The boost was 1.7bar , the turbo is GT30R/KKK 0.82AR as far as I remember. I will post it with the spec of the car. As I don't know which injectors was used on the dyno.

Funnies thing was that my cold air intake fabrication with 10x20cm filter in front rest was holding the car down , after using different filter it gave 70HP more . I need start making air filter advertisment . hehe.

lind4hl : The tuner is in Finland
Andy : Thanks
David: Will post in a week

[A80Avant]

how did you manage that??? is it a race engine? or does it have any fancy cams?? it sounds a lot more than what a GT30R is capable of...

supposedly the spec 3+ clutch can make around 650NM but that is a top limit IMHO. @ crank. I wouldnt push it harder than that.

give us the specs of the engine!!!

[Rocco]

i have installed the SPEC stage 3+ CLUTCH too as you but only with 380/400hp thanks to the 2.0bar from the RS2 turbo


you ruless

PDeter Kowaksch did your engine??

[driftin jo]

Garrett only rates the GT30R (GT3076) the largest of the GT30 range at 525 hp , i know you can push turbos a bit more but wouldn't have thought 600 plus.

[driftin jo]

GT3076R

http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT30/GT3076R_700382_12.htm

[Sweeper]

Heh. Yes the engine have mechanical lifters with fency cams . The engine is quite old. it was made 3 years ago , but only made some 500km.

The 600HP figure was a shock for me too. Btw I've removed motronic in favor of custom ecu.

yes Peter Kowaksch from Germany assambled it.

[A80Avant]

what is the revs then? 8000? 9000?

[K7ERG]

what fuel where you using?

[lind4hl]

a80avant: approx 8000-8200 revlimit or something, oilpump dont hold over 8500rpm, drysump requiered

[geryS2]

got any pics of the car and works u made ??

Cheers

[jade]

On GT30R and my PK Engine yesterday.

The tuner is saying the car would be able to put around 760Nm but the clutch doesn't cope with it.

The clutch is Spec clutch 3+. Does anyone know are they capable of 650Nm+ values ?

Btw , Hi everyone , was away for a loong time , didn't have time to be here as the car was in the garage for about 2 yers

Hi good to see you around again