034 engine mounts?

[sjw185]

Anyone got any feedback on these mounts in street or track density?
Also found threads about oem mounts and using uprated snub mount?
Think I burst my offside one when changing out turbo

http://www.034motorsport.com/product_info.php?products_id=18578

[caterpillar]

use the street one,the track ones are for the track use( delring plastic or similar)

[Flat on my back]

Nope...

Street mounts are made from a softer density rubber compared to the Track ones.

I'm running Track engine mounts plus a snub mount, only notice it when you are stationary...only slight increase in vibes coming through.

[DJones]

I'm also using track density, as you say only (slightly) noticeable at tick over. The gains in my view far out way any losses..

[adamw]

im using the 034 motorsport engine and gearbox mounts. i think thay are very good and only slight increase in vibrations at idle.

cheers adam

[sjw185]

Thanks for the input
Track ones could be ideal for me then as the s2 is mostly for fun driving and track days

[A80Avant]

i bought the street density ones to replace the OEMs next year.Car is used everyday,so i thought of going more casual!

[stiglet]

The motorsport ones are the solid ally/delrin. Don't get those unless you like noise.

Get the track density ones. They are still rubber so will absorb most vibrations.

[stevieyid]

Do those mounts in the first link fit an ABY S2 Coupe?

[stevieyid]

sorry just relaised it says at the bottom will fit an ABY, so i have just answered my own question

[QuattroFever]

further to that tho will they fit an ABY with snigle mass flywheel??

Only one hole in the pic looks like you can slide it, are the original mounts like this with only one elongated hole??

http://www.034motorsport.com/product_info.php?products_id=18578

[Jamo]

further to that tho will they fit an ABY with snigle mass flywheel??

Only one hole in the pic looks like you can slide it, are the original mounts like this with only one elongated hole??

http://www.034motorsport.com/product...ducts_id=18578

Makes no odds, when going to single mass from dual the slack is taken up on the mounting brackets not the mounts themselves

[QuattroFever]

laaavly jaably.

[MidnightBlueS2]

I'm also using track density, as you say only (slightly) noticeable at tick over. The gains in my view far out way any losses..

Ditto here. Never regretted fitting them to my ex-Avant

[bambridge]

Got some of the track ones (alum & delrin) if anybody needs some
pm me

Cheers

Kev