Which sender in this pic is for the oil pressure, what is the other one for?
My pressure warning is going loopy at the moment but guage reads ok
My pressure warning is going loopy at the moment but guage reads ok
-
-
1 is the sender for the guage.Originally posted by martinjsWhich sender in this pic is for the oil pressure, what is the other one for?
My pressure warning is going loopy at the moment but guage reads ok
2 is for the warning buzzer IIRC91 Modded 3B
14 A6 Avant Black Edition -
cheers steve, so i need a new no 2 then.Comment
-
Lucky it's #2 The pressure sender is £30 +Originally posted by martinjs91 Modded 3B
14 A6 Avant Black EditionComment
-
#2 can be a swine to chnage if your stuck without the right kit. I blew the top clean off mine and dumped all the oil all over the road
Ended up being recovered so I could change it 
056 919 081 E they've gone up to £7.63+VAT retail.
Benthe best intentions are fraught with disappointment - gil grissom
sigpic
1994 ABY Avant - it's getting thereComment
-
Originally posted by s2avant
eehh, a cheap S2 part...this cant be
martinComment
-
You've not succuessfully changed it yet Martin, dont go and jinx it !!
Ant
2007 Mk5 Golf GTi, 3 door, DSG, REVO Stg 2 and other goodies
2011 Kawasaki Z1000
Comment
-
fogot about that, its in the most inacessable place on a 3bComment
-
What is your gauge reading?
If it is over 5 bar - your pressure gauge sender is connected the wrong way round! And this causes the the warning to flash - BTDT today.S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
it reads 4bar at speed and about 2bar at idleComment
Comment