lightweight tappets

[spink]

I have heard rumour that there are some lightweight tappets on later vag cars that can be fitted to an S2,anyone know a part number and or supplier?

[AndyP]

I bought a set of lifters from Custom Autocraft, they were Febi Bilstein parts and I'm sure they matched a weight quoted on here for the lightweight lifters, 67grams rings a bell.

[A80Avant]

i bought the 034 ones and those are lightweight!

[AndyP]

I'm certain these are the same thing

http://sites.internet.lu/folders/customautocraft/typeB3-B4_80_90_S2_RS2.htm

http://www.034motorsport.com/product_info.php?cPath=28_63&products_id=464

2.25oz = 69grams

3oz = 93grams

Mine definatley wern't 93grams.

[S2central.net]

Yeah - there was a thread about these in the past - EspenW had good evidence of using them on a 16V Golf - same head essentially as S2 (minus a cylinder)

[EspenW]

Yeah - there was a thread about these in the past - EspenW had good evidence of using them on a 16V Golf - same head essentially as S2 (minus a cylinder)

8v Golf, but same lifters.

[spink]

cheers

[Flat on my back]

.

These might be the ones...the underneath is different. Had some info on them somewhere...

http://cgi.ebay.de/Hydrostoessel-Sat...d=p3286.c0.m14