Fitting compatibilty - fuel lines

[vcosmin]

I am gaterhing parts for the fuel system of my car, so far

2xA1000
1xAeromotive Fuel Pressure Regulator

i intend to order

A1000 Fuel Pump Fitting Kit
http://www.jegs.com/i/JEGS/555/150006/10002/-1
http://www.jegs.com/i/JAZ/547/250-012-01/10002/-1
http://www.jegs.com/i/JAZ/547/378-240-03/10002/-1

and there is the thing i am not sure about, the fuel lines will be ,

http://www.frozenboost.com/product_info.php?cPath=219&products_id=1202&osCsid=560c953ded53cb89144dc58fad250d31

problem is with the fittings, they dont have it on stock, so am want to know if the fittings from aeroquip are compatible with teflon lines, like this one ? http://www.streetperformance.com/par...2-fcm1013.html

??

[lind4hl]

might not intresting but 2x Aeromotive A1000

That is capable of 1400bhp on Regular gas

[vcosmin]

2 sets of injectors, and e85

[Jonnybravo]

Standard Aeroquip hose :



and correct fittings :



Teflon lined hose :



and correct fittings :




The correct fittings for teflon lined hose as far as I'm aware are just like the brake hoses you make up, I used the gold fittings on my last car but this was only for everything inside the car to stop the fumes as I presume is why you want to run them.



What bore hose are you running from the pumps ? -10 ?

[vcosmin]

yes -10 all the way , what was the price, for straight fittings ?

[Jonnybravo]

I'll go and take a look for you, I get all the fittings through Think Auto and I think I kept the reciepts

[vcosmin]

One more question, does the A1000, has a valve of some kind for letting the fuel flow in one direction only ? because on injector row, will work only on boost ! Thanks.

[vcosmin]

In-Line Full Flow Check Valve (Male -10 AN inlet, Female -10 AN outlet)
found it

[GazzaG60]

not knowing a great deal about fueling systems do you need -10 lines size.

i presume its a super hp E85 setup that requires it. im going with twin o44 on -6 hope its big enough.

[vcosmin]

not knowing a great deal about fueling systems do you need -10 lines size.

i presume its a super hp E85 setup that requires it. im going with twin o44 on -6 hope its big enough.

Well actually, i dont think that is super hp, i hope about 700hp, on e85. Initially i bought one A1000, and it seemed to be at the limit, so i bought another one, just to be safe. And the teflon lines were something like 4$/feet, not very expensive., about the size, i thought to keep the same size, from the tank, till the FPR, hope is not a bad thing.

[GazzaG60]

not too up on E85. 700 is super enough.

let us know how you get on. it will be interesting.