You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
The "K" is the ABY and ADU (RS2) version, the "H" is the AAN and I *think* the 3B version is the "J". Similar but different. I am running a "K" on my MRC S/W RS2'd AAN. Not totally happy with it, might go back to the "H". (Also running a 1.9 Bar 034 wastegate spring so that could be part of the equation).
I think the H part number is for the URS4/S6, the only difference is the location of the electrical plug. Be very careful fitting them, i broke my last one pushing a hose onto it, was an expensive mistake
Hi all, ordered a replacement 034906283H for my avant as it has a 034906283K on it Thing is the three branches are at 90 degrees to the connector on the H but not on the K! Do I just keep the longer of the three branches to the same (maf) hose or is there something amiss? The connector will then point forward towards the headlight rather than away from the block, any good!
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Cheers for any feedback 
Gonna be extra careful out in the dark
Leave a comment: