does somebody have a picture of where to cut ?
-
sigpic
Audi S2 Coupe - 92
Koni + H&R. PowerFlex bushes. 3" Exhaust
RS2 IC. RS2 TURBO. RS2 EX MAINFOLD
Best ET 2006 13.8 @ 157 Km/h (Stock turbo and EX mainfold)
Best ET 2007 12.78 402m, 0-62mph: 4.2 sec, Speed: 175 km/h (GTEC)(1.1bar)
Best ET 2007 201m 8.15@140km/h
Best ET 2008 402m 12.34@177km/h
My Project
http://www.s2forum.com/forum/showthread.php?t=16997 -
Just cut down where the pump touches the housing it becomes obvious as you look at it .sigpicComment
-
Comment
-
Ok, about 5 mm or so ?sigpic
Audi S2 Coupe - 92
Koni + H&R. PowerFlex bushes. 3" Exhaust
RS2 IC. RS2 TURBO. RS2 EX MAINFOLD
Best ET 2006 13.8 @ 157 Km/h (Stock turbo and EX mainfold)
Best ET 2007 12.78 402m, 0-62mph: 4.2 sec, Speed: 175 km/h (GTEC)(1.1bar)
Best ET 2007 201m 8.15@140km/h
Best ET 2008 402m 12.34@177km/h
My Project
http://www.s2forum.com/forum/showthread.php?t=16997Comment
-
We cut down the full legnth of the housing hope that helps.sigpicComment
Comment