which cams!!!!!!!!!!!!!!!!!!!!!

[Flat on my back]

.

The search function is your friend...

Try here...

http://www.s2forum.com/forum/showthread.php?t=40247

[trackslag]

The search function is your friend...

Try here...

http://www.s2forum.com/forum/showthread.php?t=40247

cant find 7a inlet cam or adu ex cam there,was that right link?

[Jamo]

Just look in the for sale section!

[Audi_CQ]

hi what about 7A inlet cam (224deg 10.5mm lift) timed at 110deg and use the 205 deg 8.5mm exhaust cam from ADU, timed at 120 deg seem like a good use of stockcams?
Dose anyone have these above cams laying around that would be for sale??

I've tested two sets of 7A cams and they are 212deg not 224. Many books says opens 6deg before TDC, but it's after TDC so 212 and not 224. If you compare 7A to NM, my guess it's the same cam spec only NM is 6deg advanced.

[S2central.net]

Interesting... unless there was a couple of 7A variants. The cam data I posted in the spreadsheet came direct from OFRM.

Also - I have a spare 7A inlet cam that I can sell - not sure what market rate really is on one though.

[GazzaG60]

i kinda collect cams. not sure why. and not many of them of much use

i got 2 x 7a sets
2 x kr sets
1 x 6a
1 x 9a
aby
schrick solid lifter set for 16v.

dont even have a 16v. lol. i bought the 2 7a sets to run twin ex cams but id need pulley wheels as the 16v ones are ont other end. boo

[S2central.net]

That makes you a very 'calm collected' chap

I'll get me coat...........................

[GazzaG60]

only in ireland lol

it aint no cracker lol

not that calm and collected. car has been in autoglass following me complaining. into day 2 of fitting the windscreen. heres hoping time is a great healer.

2 ex cams though. anybody done it. its the 16vt cam set of choice...or was. although standard cams work great. more lift.

whats the take on these?

[S2central.net]

Gazza - its not one I recall, so you could be 1st to try and let us know if its a flyer or a dog.

[Rusty]

Old KR trick eh Gazza

The 7A exhaust cam and RS2 exhaust cams both look quite nice options on the inlet wrt to near stock duration and a little more lift on the RS2 and more of both on the 7A.

[GazzaG60]

thats the one andy. i got the kr wheels with the keyway cut in the correct place so got 2 sets. wheels on other end. its a very common and proven trick for the 16v. all ex cams were the same but inlets differ. more power was available throughout the rpm range.