Oil Problem¡¡¡

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • santis2
    S2Forum Buff
    • Aug 2008
    • 28
    • Country: Spain

    #1

    Oil Problem¡¡¡

    Oh noooo¡¡¡
    Two months ago, I´ve felt that the Aby wasn´t well. At the begining I thouhgt that could be an air pressure problem, so I changed the air hoses, but the car still went bad.
    Today I opened the 20v cover to see the state of the spark plugs, and i saw that three of these were totally covered of oil, and the other two have a few of oil; I,m scared¡¡¡¡¡. The engine lose oil for the ¿rocker?gasket, so it is broken.
    I supose there are much pressure because It has capped the system of gases recirculation. I´ve uninstalled these parts, and then i cleaned these:

    ¿What do you think i must to do?
    Please help me

    Thank you, and sorry for my horrible level of english
    Attached Files
  • Flat on my back
    S2Forum Fiend
    • Jan 2007
    • 2449
    • Country: United Kingdom

    #2
    .

    There are 2 rubber seals for the 'rocker cover', 1 goes all the way round the outside edge and number 2 is a set of 5 'o' rings held in a line. It is this one that seals the spark plug holes.

    Sound like this one has failed, they do harden and crack after a while.
    Carlos.

    On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.uk

    Comment

    • santis2
      S2Forum Buff
      • Aug 2008
      • 28
      • Country: Spain

      #3
      Originally posted by Flat on my back
      There are 2 rubber seals for the 'rocker cover', 1 goes all the way round the outside edge and number 2 is a set of 5 'o' rings held in a line. It is this one that seals the spark plug holes.

      Sound like this one has failed, they do harden and crack after a while.
      Thank you Carlos; how could i know if these parts are all right?
      Attached Files

      Comment

      • santis2
        S2Forum Buff
        • Aug 2008
        • 28
        • Country: Spain

        #4
        hi, could you say me, what type of glue I must use to this?
        Attached Files

        Comment

        • Azman
          S2Forum Possessed
          • Sep 2005
          • 3205
          • Country: United Kingdom

          #5
          No glue at all, IIRC they sit in location grooves
          Dark Grey Avant
          RS2 FARB
          Powerflex Front wishbone bushes
          Alloy Subframe Bushes

          Comment

          • AUDIS2avant
            S2Forum Maniac
            • Jan 2009
            • 670
            • Country: Denmark

            #6
            You can use loctite instant gasket m8, works wery good

            Comment

            • santis2
              S2Forum Buff
              • Aug 2008
              • 28
              • Country: Spain

              #7
              Thank you, I´m reading previous posts about this

              Comment

              Working...