3 bar FPR for ABY / ADU

[Jamo]

Is there a stock Audi FPR that runs at 3 bar that fits the ABY?

[Rusty]

Anything from a Golf 3 gti

[GazzaG60]

to my knowledge there are 2 sizes of bosch. we have the smaller of the 2. the golf etc uses the larger.

id expect there is. whats a 1.8t run?

you can always go aftermarket. repo pointed me to some adjustable ones that firt the factory rail and are -6

[GazzaG60]

im thinkint older golf and corrado.

[mcandmar]

1.8t uses a 4bar same as S2, i've pocketed a few of them while in scrapyards...

[Rusty]

Golf 3 8v uses 3bar, I had one for 5 years before the S2, it's the same style. I have mine modified to 3.5 and also fitted a 4bar from a VR6 at one stage.

[europeanme]

sorry for the dumb question...reading the above comments, is it possible to fit a 4 bar VR6 FPR to an ABY fuel rail??...as I am after a new one...

I am currently 'boring' one and need to return it

[Rusty]

Yes, should be the same Bosch part

Family album agrees. There is a changeover though for the VR6

Part number you want is

078 133 534 C

Not sure how p/n 037 133 035 C fits in, might be a no change or a completely different thing.

[s2avant]

The ABY 4 bar FPR is the same as the VR6 one as well as a fair few other models/engines.

Ben

[europeanme]

Yes, should be the same Bosch part

Family album agrees. There is a changeover though for the VR6

Part number you want is

078 133 534 C

Not sure how p/n 037 133 035 C fits in, might be a no change or a completely different thing.

is this a bosch number??....and any bosch distributor sell these??..