I'm trying tofind the o rings for the fpr for an aby fpr, the dealer can't look up the part numbers, can someone help me out?
-
-
I don't b see O- rings. I think O- rings sell's with FPR
-
that sheet has the 3b style fuel rail...Comment
-
the part number for the ABY FPR is 078133534C, which actually looks like it is the same part number for the 80/90 V6 motors as well...Comment
-
Now looking up from a v6 i found the gasket set:
also on that image it shows GASKET SET for FPR part number 037198031
can anyone confirm that it is correct? only problem I see is that because it is going into a different fuel rail assembly they could be using different size gaskets...
however if you ordered the above mentioned part number it should come with the gaskets and therefore have the same gaskets....Comment
-
that gasket set also shows up for the AAN Engine, I'm somewhat confused now. I have been told that the RS2 Rail needs different size gaskets, that they are thicker gaskets and needs them or will seep... Any truth to that statement?Comment
-
The RS2 rail is the same as the ABY at least visually, the only difference is the FPR which is 3.8bar instead of 4 barComment
-
Anyone, I am going to the dealer tonight to see if I can get some gaskets and i need part numbersComment
-
Can't say i've heard of it to be honest and can find no part number in the good bookComment
-
the good book, just isn't great. I searched all morning, made a post on a US website, however no response there, which is what I expected because few people go through the trouble and few people have OEM fuel rails when they do go through the trouble.Comment
-
The fuel rail on ABY and ADU engines is the same. I've never heard of an issue with the o-rings weeping on RS2 FPRs.
I would supply 037 198 031 if I was asked for a seal kit for the FPR.
Benthe best intentions are fraught with disappointment - gil grissom
sigpic
1994 ABY Avant - it's getting thereComment
Comment