Hey guys, I have the 95 AAN lowered into my 944 and bolted up to the torque tube. While I was measuring for motor mounts and oil pan mods I noticed that the oil filter is going to be a problem. Directly below where the oil filter goes is my steering rack and there just isn't any space for a filter. I figured that you guys might know of a spin on filter relocation kit that would work on this engine. I haven't found anything yet, but I will keep looking. Thanks for the help.
-
currently: 1987 944 NA 5spd, 250 lb hyper coils, 27 mm t bars, Koni, 968 m030 bars, full delrin, Audi I5 20VT, VEMS, Tilton, EFI Express, Seimens, Race Technologies
see the AAN/944 swap at Nina's 20VT -
As so often happens I think I have found the answer to the problem right after posting the first time. Some parts made by trans dapt appear to be correct. Straight adapter pn#1013, 90 deg adapter pn#1413, or a complete kit pn#1113. While you will not find this application listed directly on their site, some cross referencing of dimensions from the wix site led me to pick this unit. I'll order one in to check fitment.currently: 1987 944 NA 5spd, 250 lb hyper coils, 27 mm t bars, Koni, 968 m030 bars, full delrin, Audi I5 20VT, VEMS, Tilton, EFI Express, Seimens, Race Technologies
see the AAN/944 swap at Nina's 20VT
Comment