Machine Shop Birmingham / Midlands

[Jamo]

Anybody recommend a machine shop in Birmingham / Midlands?

I have a 20-30 min job I need doing ( drill / tap / grind ) but need it doing ASAP when I find a shop

[Flat on my back]

.

I know a good one, but it is Cheltenham...

What xactly you need doing?

[Jamo]

drill / tap / grind of turbo hotside

[Flat on my back]

.

And the turbo is in pieces...they do work on cast heads and zorst mannys so should have the tools/bits to cope with the hard material of the hot side.

Thread size needed?

[GazzaG60]

is this not possible yourself?

mines about 1 inch down the pipe

[Jonnybravo]

Contact Martin @ Reyland Motorsport

http://www.reyland.co.uk/

[Jamo]

Cheers Jonnybravo

[Jonnybravo]

No problem, hope he could help.

[bluequattro]

Yates's in Longton , Stoke on Trent
really good service, sorry not got the number tho

[Jamo]

Contact Martin @ Reyland Motorsport

http://www.reyland.co.uk/

Going down to see them later, they have quite a few interesting services

[Jonnybravo]

He certainly does.

If you don't know of it ask him about his tall block stroker Yb engine, raised bloke for increased stroke, very interesting stuff indeed !

[WabTheKing]

im in the manchester area if anyone gets stuck, have welding/machining/fabrication/folding/laser cutting/painting facilities
regards
will
07976299409

[Jamo]

He certainly does.

If you don't know of it ask him about his tall block stroker Yb engine, raised bloke for increased stroke, very interesting stuff indeed !

Nice guy, sorted it for a £10 one less job down

[Jonnybravo]

Nice guy, sorted it for a £10 one less job down

Good news, a handy guy to know for sure

[magarv]

Nice guy, sorted it for a £10 one less job down

Seems like my tip is a little late but maybe for another time:

http://www.jemsracing.co.uk/

Daventry isnt too far from Birmingham is it... Jon is also a realy nice guy with tons of experience