Small Coolant Hose

[bad8008]

Ok.
The top left is the "Longer / thin one that links to turbo = N 020 262 1 (sold by the meter)" and the middle right is the "Short/fat one into thermostat housing = 034 121 063 C" right.
Does the middle right connect to the Banjo?

[S2central.net]

Tweaked photo shows turbo link hose into the banjo joint.

[Dingo]

Here's a different picture of the same hoses

[bad8008]

thanks guys.
I'm guessing to get the turbo link hose only.
Is that a wise choice terms of opportunities?

[Jamo]

Post 10 & 15 replace both geez

[bad8008]

Guys, I was trying hard to look for the Short/fat hose connected into thermostat housing just like in the tweak pictures, but can't seem to find it at the bonnet.
In fact, my thermostat has a different hose setup.
Btw, we are speaking about the bonnet on RS2 right?

[bad8008]

Its confirm, the short/fat hose is not setup on the ADU engine. The hose is split 2 from the thermostat. I'll post some pics when I got the chance.
Cheers guys.

[bad8008]

here's a pic of the long thin hose to turbo and long thick hose to thermostat of my ADU engine.
the long thick hose into the thermostat is branch into 2.

[Jamo]

here's a pic of the long thin hose to turbo and long thick hose to thermostat of my ADU engine.
the long thick hose into the thermostat is branch into 2.

That is not normal

Never seen that arrangement before, where does the other pipe go too?

[bad8008]

the hose goes into the thermostat, and probably (my logical thinking) when the thermostat cuts off, and since the hose is split the coolant goes the other way. seems like the thermostat acts like a valve or something.
i'd be interested if anyone with ADU has similar setup....

[Mikes2]

Looks like this RS2 has additional cooling for hot climate.

You'll need to get part number off the old hose if you can

[jade]

here's a pic of the long thin hose to turbo and long thick hose to thermostat of my ADU engine.
the long thick hose into the thermostat is branch into 2.

The hose pictured go's to the bottom of the expansion tank on the RS2

[Mikes2]

8a0 121 109 B

[bad8008]

The hose pictured go's to the bottom of the expansion tank on the RS2

Isn't the discharge off the expansion tank goes into the radiator inlet at the bottom of the radiator just like the ABY engine?

[bad8008]

8a0 121 109 B

thanks.
this is the pt # for the twin hose?