Serpantine tensioner for an AAN?

[UrS4boy]

Further Investigations of the Volvo Serpentine Belt Tensioner Pulley and Tensioner Ma

You can find only roller to buy. If needed i can source a pn.Just not now i do not have access to suppliers cat. If the arm is in good condition..

Not from Audi. But you can either buy a new bearing or you can buy a complete Volvo roller pulley.

Further Investigations of the Volvo Serpentine Belt Tensioner Pulley and Tensioner Maintenance

http://forums.quattroworld.com/s4s6/msgs/308761.phtml

[Wizard-of-OD]

But you can either buy a new bearing or you can buy a complete Volvo roller pulley.

This is the next part i am going to be making

[UrS4boy]

This is the next part i am going to be making

I don't doubt your machining skills but would question whether you could make any money when the Volvo 272136 pulley is available for say, US$32.

https://www.fcpeuro.com/products/vol...-pulley-272136

Just sayin'

[Wizard-of-OD]

I don't doubt your machining skills but would question whether you could make any money when the Volvo 272136 pulley is available for say, US$32.

https://www.fcpeuro.com/products/vol...-pulley-272136

Just sayin'

I didn't think I would sell any of the Aluminum alternator and idler pulleys but I sold all 15 i made