Audi 90 ABY conversion help/ advise please

[simyboye]

Hi there,

Just in the middle of installing an ABY from Spink with thanks and have a few questions with regards to hoses and electrical things. So any advice will be greatly appreciated.

1. Put ABY loom in and I dont have a plug for the gearbox. Is this something I need to splice in from the old loom? Is this my speedometer?

2. Wastegate. Where does the tiny vacum hose go?

3. Front of engine. Have a tiny hose again, where does that go?

3. ECU. Vacum hose on that too, wheres that go?

Sure I'm just being fick here...

Many thanks.

James
07768 936 000

[PeteUr]

1. you should have a plug there somewhere for the speed sensor, same as the one you remove
2. the one on the top of the wastegate - don't worry common question, there isn't a pipe to go there
3. which hose you on about?
3 - part 2 - you need to look at the vac tree diagrams on here about that one, i'll try find it.

[PeteUr]

for future reference

[Tonks4x4]

the plug for the gearbox on the s2 is a rectangle black one. You need to splice into this part of the old loom for the reverse lights and the speed sensor. Which are round 2 pin plugs. One is red and one is white.

[simyboye]

Hi there,
I will get some pictures sorted in the next few days. Tonks and spinkster, appreciate your help...

Tonks. Do you have any drawings or ideas how to get this PS pump mounted?

Oh, also, the old loom had a what looks like a smaller ECU. What is that? Again, ill sort pictures ASAP.

Thanks again