God no you will end up with only slow.
----12v feed-------------------Fan
----12v feed----.47ohm--------Fan
----12v feed-------------------Fan
----12v feed----.47ohm--------Fan
-
Probably the longet S2 project in history EVER!
-
no i didn't in the end ran out of time and just wired it into the existing loom on the 1st speed. Appears to work pretty well 99% of the time, just if the weather is really really hot then its nudged up the scale a bit. I will wire in a manual switch which will help i think as if i run it at the moment its via the aircon and that ends up drawing heat through the rad from the condensor too
Have you not fitted it yet?sigpic
1992 3b S2 CoupeComment
-
Yes it's fitted, just got to wire it. Which of the 3 existing wires did you use to connect yours?sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racerComment
-
the brown and one of the others...will need to check for the one for the 1st speed one. Also make sure you plug them in right otherwise it will run backwards - BTDT
sigpic
1992 3b S2 CoupeComment
Comment