How much can rs2 injectors provide at 3bar?? and how much at 3,8bar?? does any know?? (in cc) i
rs2 injectors???
Collapse
X
-
form the doc that I have they are 0 280 150 984 444cc - 3,8barAKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net -
If you want to calculate the new injectorflow this formula will guide you:
(square rot from (new pressure/old pressure)) * old flow = new flow
/Mike/Mike
---------------------------------------
S2 RS Avant@355hp "For sale"
A4 Avant TDIq@170hp
Datsun 240Z@550hp
BMW M3 race car@321hp
GarageComment
-
RS2 injectors flow 360cc at 3 Bar, and sure not 444 at 3.8. If you want anything over 430 HP, skip them and get something that flows more and that's cheaper.'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
www.MRCTuning.com
info@MRCTuning.com
Workshop DirectionsComment
-
and what would You say that the injector form s2 nr 0 280 150 951 has 346cc at 3 bar ? the diference is so small ?
After some investigating my bosch info send me:
0280150984
EV Typ: 1.3
Betriebs Druck (kPa): 380
Q-stat norm (g/min): 270,0
q-dyn norm (g/1000 Imp.): 7,58
ts norm (ms): 0,82
'Wider-stand (Ohm): 14,5Last edited by Albert; 23 July 2004, 15:03.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
Hi
I run them @ 6.5 bar @ full boost.
No problem.
But I don´t know how much they flow.
I´ve always heard 440 cc @ 3.8 bar.
Don´t forget that the boostpressure will decrease the pressure in the nozzle.
1 bar boost and 4 bar fuelpressure = 3 bar fuel
Søren S2Comment
-
nope ... the fouel regulator is 1:1
0 bar should be 3.8 or 4 bar in fuel rail... than 1 bar would be 5 bar in the fuel rail and so onAKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
That´s what I was trying so say....
Thanks
Søren S2Comment
-
-
Are the RS4 injectors better than than the RS2 versions? If so are they a straight swap as they are a lot cheaper than RS2 ones.
Benthe best intentions are fraught with disappointment - gil grissom
sigpic
1994 ABY Avant - it's getting thereComment
-
You could perhaps change fuelpressure regulator instead, to increase pressure.Originally posted by zloboi am using rs2 injectors but they are to smal now.. so i have to replace them now i am runing at 100%
The Porsche 511cc/min are otherwise common to use. In Sweden I think the cheapest place is here http://www.mrm-racing.a.se/index1.htm They charge you for 744:- SEK per injector.
br
/Mike/Mike
---------------------------------------
S2 RS Avant@355hp "For sale"
A4 Avant TDIq@170hp
Datsun 240Z@550hp
BMW M3 race car@321hp
GarageComment
-
Ok. i thing i am going to by 630 or 720c @ 3bar. today i tryed out my car a bit on the strip i ran 12,10s and 187Km/h i think thats nice.. =)ABT C5 Lord Of The Rings
2004 1/4 Mile ET 12.00 191Km/h @1,5Bar
2009 1/4 Mile ET 11.92 213Km/h @ 1,5Bar 437WHp
2010 1/4 Mile ET 11.45 110Km/h @ 1,5Bar 437Whp
kostic.nuComment
-
Comment