how do i clean ISV?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vonbeck
    S2Forum Fiend
    • Feb 2004
    • 2455
    • Country: England

    #1

    how do i clean ISV?

    as title and what with? cheers
    ABY Cricket Green Pearl Coupe, blk leather
    THE ONLY TROUBLE WITH DOING NOTHING IS KNOWING WHEN YOUR FINISHED!!!
  • s2driveruk
    Super Moderator
    • Jul 2003
    • 12696
    • Country: England

    #2
    easy enough:

    1) undo 3 jubilee clips
    2) unpug connector
    3) spray carb cleaner into the two outlets and give a good swill out
    4) repeat until all clear
    5) Refit, tighten jubilee clips and replug in the connector
    6) Grab beer

    Cheers
    David
    sigpic

    1992 3b S2 Coupe

    Comment

    • europeanme
      S2Forum Possessed
      • Oct 2005
      • 3817
      • Country: United Kingdom

      #3
      i removed mine from the car....
      get a 9v battery and a couple of wires....loads of cleaner....carb cleaner has been mentioned, i used "Zip" clean...

      connect the the battery to the 2 terminals in the ISV and spray cleaner until your nearly swimming in the stuff (what i mean is penty of cleaner)

      then keep opening and closing valve to work the crud out.....took me half a dozen goes before the cleaning fluid was clean...

      it is worth it in the end...

      good luck

      Mike

      Comment

      • vonbeck
        S2Forum Fiend
        • Feb 2004
        • 2455
        • Country: England

        #4
        i`ve got loads of ipa can i use that? or should i stick to carb cleaner cheers
        ABY Cricket Green Pearl Coupe, blk leather
        THE ONLY TROUBLE WITH DOING NOTHING IS KNOWING WHEN YOUR FINISHED!!!

        Comment

        • Phil Payne
          S2Forum Addict
          • Jul 2009
          • 328
          • Country: United Kingdom

          #5
          Pul the hose connections off, run the onboard diagnostics until they're operating the valve, and spray carb cleaner in.

          Comment

          Working...