RS2 Stopped! Ignition point sensor (g4) ?

**S2central.net** · 1 June 2010, 17:48

The pin needs to protrude about 12mm from memory but please double chek that.

**UrS4boy** · 2 June 2010, 00:49

Originally posted by 90/90qs

I have bought one of these "pins" from the dealer for my 7A. The pin they gave me was actually a piece of spring steel tubing with a cut down the side so that it could be pinched and slid into the hole. - the cut was actually toothed like so: /\/\/\/\/\.

The 7A "pin" is not like the dual mass flywheel reference pin, as shown here (at the 8 o'clock position):

as discussed in this post:

quattroworld.com Forums: Dual Mass Flywheel info

http://forums.quattroworld.com/s4s6/msgs/24536.phtml

The Audi Enthusiast website. Forums for all Audis including A4, S4, A5, S5, A6, S6, allroad, A8, S8, TT, R8, Q5, Q7, 4000, 100, 200, v6, v8, vintage, local forums

RS2 Stopped! Ignition point sensor (g4) ?

Comment

Comment