Are there any appreciable advantages in fitting an aan/aby/adu windage tray to a modified rr/3b engine?There is quite a lot of info on the net regarding windage trays,but nothing really specific to the Audi I5 turbo.
Any btdt?
Any btdt?
-
-
Don't they all use one anyway? I know my 3B engine did.sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racer -
Looking at ETKA,the S2 3B did have the full length windage tray,but the 200 3B and RR did not.Instead they had a half length steel baffle fitted lower down in the sump.
I have an AAN tray,and wondered if it was worth fitting to my RR.Comment
-
If the later engines (ABY & ADU) do indeed have a different 'windage tray' then I think its fair to suggest that it would be a worthwhile upgrade - Audi would only have seen fit to do that if they had good reason.Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
Comment