3B engine ignition upgrade¡¡

[Rocco]

http://cgi.ebay.de/ws/eBayISAPI.dll?...=STRK:MEWAX:IT

what do you think guys about this item ?

do you know what type of COILS are?? they are original from AUDI but dont know if from ABY/ADU or if they are from RS4 or something similar....


and about the price?? it is very expensive for all new parts except the used AAN ecu??



this item should be interesting for 3B owners ¡¡

the hard work seems to be the pin swap.....

[A80Avant]

didnt you buy coils from marc?

[20vQC]

pretty expensive! but I'm sure I will buy it as soon as I can.... just need to buy the S2-3b :'( :'(

[Rocco]

didnt you buy coils from marc?

i did not¡¡

because i was using 3B Vems...

[Rocco]

pretty expensive! but I'm sure I will buy it as soon as I can.... just need to buy the S2-3b :'( :'(

but only the 5 new coils cost a lot of money true??

[Rocco]

ok,the seller said me that these are a set of 5 new RS4 V8 coils.....

and it has 3 different ways of installation....

he asked me about if i would like to keep proconten sistem or if my car has AC ....

[prj]

Buy 2.0TFSI or 1.8T coilpacks.
Price for 5 coils is about 150 euros.

[rs200]

these coils are from brand "BREMY" , and they are similar to OEM audi coils..

this upgrade is not possible to do on 3B without ecu pin swap... I done this swap few times..

there are 2 tipe of coils , longer and shorter , longer are for 3b valve cover , and shorter for aan cover...

good thing in these instalation is that you don't need POS any more...

but 800 euro is too much , because I can fix that job for less money...

[prj]

but 800 euro is too much , because I can fix that job for less money...

Yes, this job with parts included should not cost more than 400 euros.

[rs200]

1.8 t coils are shorter one ,and can be only use on aan valve cover.

[rs200]

you need:
aan ecu ... how much ? 300euro..?
coils 110 euro + wires ...150 euro
4bar FPR 50 euro
my work 150 euro

650 euro if I done the jub , 500 if you do it ... you save 300 euro, or 150 and have no problem

[prj]

you need:
aan ecu ... how much ? 300euro..?
coils 110 euro + wires ...150 euro
4bar FPR 50 euro
my work 150 euro

650 euro if I done the jub , 500 if you do it ... you save 300 euro, or 150 and have no problem

I bought last AAN ECU for 120 euro and FPR is also cheaper.

[Rocco]

these coils are from brand "BREMY" , and they are similar to OEM audi coils..

this upgrade is not possible to do on 3B without ecu pin swap... I done this swap few times..

there are 2 tipe of coils , longer and shorter , longer are for 3b valve cover , and shorter for aan cover...

good thing in these instalation is that you don't need POS any more...

but 800 euro is too much , because I can fix that job for less money...

and 7A cam cover needs the same longer coils like 3B cam cover true??

the AAN ecu he sells,must be for use the 3B ECU connector with pin swaped .

wich number of pin/pins should be swaped for use these coils with AAN ecu?? because you did it various times true??


ABY coils are much more expensive over 1.8T coils true??

thanks¡¡

[prj]

You can't swap pins in ECU, you must swap the loom.

[Rocco]

you need:
aan ecu ... how much ? 300euro..?
coils 110 euro + wires ...150 euro
4bar FPR 50 euro
my work 150 euro

650 euro if I done the jub , 500 if you do it ... you save 300 euro, or 150 and have no problem

and where did you bought those custom wirings??

i got installed 7A 4bar FPR....