You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
1) J220 is the ECU. It's up under the passenger side of the dash behind the heater box.
2) Knock sensors are on either side of the block (I believe ) You'll need the following part numbers:
1 x 054 905 377 G 535mm lead with blue connector £39.89 + VAT
1 x 054 905 377 A 740mm lead with green connector £39.89 + VAT
Most main stealers won't find them on ETKA as you have to look at Coupe for the blue one and Avant for the Green one
Ben
You are a gentleman Ben.
Time to call Martyn tho' and see if a deal can be struck!
I gave up trying to get the ECU down from its perch.
Installed the boost gauge by cutting the line in situ.
Sounds like the KS's will be a bitch to install without getting under the car?
I know from Greg_S's recollections the job is a PITA!
(http://www.s2forum.com/forum/showthr...t=knock+sensor)
hello chaps!! its lee with the s2 (91) i with the f***** misfire!!! i put new cap on it and its still doing it!!!! wat now it had new plugs ht leeds and a cap wat can it be the ecu cum up with no folts but the ignition folt!!!!!!!!!!!! help
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment