Volvo K24 turbo in audi application.

[Ruffiano]

Correction max tq was before 4k max rpm was 4.5k

[andy10v]

Sounds good.

Anybody has any luck finding these in the uk?

PRJ do you intend to do anything for the 3b?

[Ruffiano]

Ps my max hp was hit just before 4k rpm

[Ruffiano]

New from the dealer(stealer)they are750 usd they sell used from 150-500 usd, then add an Audi hotside

my best awtq number was
359.3

[prj]

1/3 of the price?? buying new too?

Well okay, maybe 1/2.
And no, not new, that's the thing - there's plenty of these available compared to K24-7200's.
I need to make some sort of a generic chipset for this turbo though. I don't think running RS2 chipsets will be very good with it.

[Rocco]

1/3 of the price?? buying new too?

[S2central.net]

Be interesting to see what sort of air temps are in play at 1.9bar on the ovlov turbo - maybe it will choke a little more than RS2 item - then again - maybe it won't - has anyone got a compressor map for the Volvo 7400 turbo ?

[prj]

If it's running 1.9 bar boost, I don't see why not.

[Error404]

nice result, will it deliver the torque of that an RS2 turbo can?

[prj]

your Volvo turbo spools quicker than the oem k24 7200??

Pretty sure it does.
I will put on my turbo in a few weeks and map it on a dyno.

So basically this is a turbo that spools faster than the RS2 unit, gets as much horsepower as the RS2 unit and is 1/3 of the price.
Of course it's not fully bolt on, but we got a winner.

[Rocco]

your Volvo turbo spools quicker than the oem k24 7200??

[Ruffiano]

Yes pump gas, and at 4500' above sea level

[S2central.net]

This old chestnut... Reckon on multiplying wheel HP on quattro by approx 1.25 for a flywheel estimate. Therefore 295 at the wheels should be in 370 territory. If it spools quicker than RS2 turbo then job is a good un.

[Costash]

More like 400

[Rocco]

Nice.
You are running pump gas, right?

290-300whp with K24-7000 spool is my target as well.

WHP should be around 360 crank power?