You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
You don't have to upgrade an RS2 to a bigger turbo to bend the rods, just dial in 2.2Bar+ at sub 3500rpm and you'll be well over 600Nm and close to remodelling your internals.
In Greece, there have been a few RS2 engines (ADU) which have repeatedly used bigger turbos and didnt bend any rods, and im positive that this was because all torque was produced after 5500rpm or so. If you manage to fit a small enough turbo to produce more than 600Nm at 3000-3500rpm, then you may have your bananas!
i read alot about people upgrading their rods everytime a bigger turbo is mention.but what i wan't to know if anybody on here as bend rods on aby or adu due to upgrading to bigger turbo?
i believe a Rs2 rods can take upto 500bhp or 700nm no problem.i'm sure alot of you will try to prove me wrong,but with what evidence.
before you jump on the bandwagon,please show me a broken engine due to big bhp and nm.
is anyone actually brave enough to test these rods to the max,i think not.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Leave a comment: