just after a bit of info people, would a set of 3b samco hoses fit an ABY engine, bit of a noob question i know but i dont know the differances as i havnt had a close up proper look at the two side by side
cheers
dean
cheers
dean
-
URS4 load lugger
Accord type R being used by my missus but is my daily hack -
Yes it can be done, but you need to use ABY/ADU pressure pipe. There might be a tweak or two with the hose that connects turbo to intercooler. Someone else has definitely BTDT in this way. I think its a better setup as there are less hose joins on the ABY vs 3B so its fundamentally more robust.Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
-
cheers for the quick reply, i can now have a good crack at fitting them on friday as i have come across a setURS4 load lugger
Accord type R being used by my missus but is my daily hackComment
-
Get the ABY pressure pipe first - cannot be done without that piece... Actually better to try and get the later plastic pipe as it doesn't heat up anything like as much as the metal one.Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don'tComment
-
Turbo to intercooler hose needs shortened BTDT.Current-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stockComment
Comment