AAN aftermarket engine management advice

[LEE HIDSON]

Can anyone advise me on an aftermarket engine management system for the AAN engine.

[JP]

Stock management if you have it is very useable for 600hp applications. But if you want to away with all the gubbins or you dont have stock management and loom then I guess VEMS seams to be the way to go.

[terrybullwon]

There are many people running Vems but there are many options it depends how much work you want to put in and what your budget is.

I can highly recomend Tatech works with your stock sensors if you want and you dont have to weld to your fly wheel to get the the signal from your fly wheel like vems seems to have to.
Other brands are Haltec, Nira, Autronic, 034, KMS, DTA and a few others i have forgotten.

[denniselbows]

Wile your on the subject of after Market engine management is there one that offers fly by wire throttle . It would take away the hassle of finding a cable to fit when going reverse inlet manifold

[terrybullwon]

Wile your on the subject of after Market engine management is there one that offers fly by wire throttle . It would take away the hassle of finding a cable to fit when going reverse inlet manifold

Throttle cable is no problem at all

[QuattroFever]

ahem...MegaSquirt3.

People slate it but if you actually look at the spec. Of the unit and the support out there. Plus megatune is easy to use and written in proper english.

Need to weld a toothed wheel to your front pulley though. Or buy one ready done from 034 with sensor bracket and all.

[Ruffiano]

VEMS, plug and play, never any down time and a very user friendly interface.

[Nik0las]

what about KMS mp25

[terrybullwon]

Other brands are Haltec, Nira, Autronic, 034, KMS, DTA and a few others i have forgotten.

what about KMS mp25

[Nik0las]

EMS Stinger 4424
?