20vT ECU onto a 10vT

[porkkis]

Yep, a syncro bus

Ian shoot a precise question and I'll answer. Basically all it needs is a trigger system 100% equivalent to 20vt and that's the only true requirement. If you plan to run a distributor, use 3B ecu and harness and modify your dizzy hall plate to have a single window and positioned as in 3B.
After that, just have it mapped.

[Ian Simmonds]

Many thanks for that, we're still planning at the moment, still considering the advantages/disadvantages of the looms (Distributor or POS's), sort of drifting towards the later loom again. Hopefully we'll be starting in early January, so if anyone's got a spare 20vT harness, ECU and sensors, drop me a PM (a left hand drive one would be ideal). As soon as it's apart I could well be pm'ing with a lot of questions...

Many thanks again

Ian