Just an Idea

[Greenm3]

Whilst having the front off the car i was thinking about the IC and route it takes.
I may b well off the mark here but why is it no possible to have the Turbo to IC pipe go in the other side of the IC. Therefore making a shorter passage for the air to travel from IC to inlet?
And i mean literally just swopping the hoses between the turbo and the Inlet around...obviously with dump valve etc?
Does the air have to enter bottom of IC and come out top? Is this is the case turn IC upside down?
Just a thought as i know sweet **** all about Charge.
Michael

[Greg_S]

take a look at mark, & dougs projects, they are doing just that.

Greg

[rotoryboy]

They have the reverse manifolds, don't they?

[Greenm3]

What i mean i hope is shown by the diagram. Bit pants but I'm on my home comp only MS paint dont have my 3D softwear.....so did this quickly.
This would mean no major modifications, and less distance between IC and inlet.
Am i way off the mark here?

[Graham]

My paint is a bit fried and will only let me do text in monster size so excuse my scrawls, but this is the best way, much shorter (much expensive), and the way Mark H has his car plummed up now.